Reset IPTables
-
- Posts: 2
- Joined: Wed Feb 18, 2015 1:12 am
Reset IPTables
I wasn't sure which thread to put this in, but this seemed like the best option.
After uninstalling Vesta, I am no longer able to connect via SSH (which is not running on port 22, but on a miscellaneous port in the 40000s range). How can I permanently remove Vesta's IPTables rules and reset them to the Ubuntu 14.04 default?
I do currently have access to the server via an IPMI, so I can make whatever changes are necessary.
After uninstalling Vesta, I am no longer able to connect via SSH (which is not running on port 22, but on a miscellaneous port in the 40000s range). How can I permanently remove Vesta's IPTables rules and reset them to the Ubuntu 14.04 default?
I do currently have access to the server via an IPMI, so I can make whatever changes are necessary.
Re: Reset IPTables
Simple answer will be
But to remove all rules and filtres, make fw.sh with come below
and
Code: Select all
iptables -F
Code: Select all
#!/bin/sh
echo "Stopping firewall and allowing everyone..."
iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
iptables -t mangle -F
iptables -t mangle -X
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
Code: Select all
chmod +x fw.sh
Re: Reset IPTables
by looking at :
I'll say:
find and modify inside the firewall rules
such as an example I restrained the port 8083 to my VPN but it went down so I replace the VPNsubnet by 0.0.0.0/0 :
then
Code: Select all
https://github.com/serghey-rodin/vesta/blob/master/bin/v-update-firewall
find and modify inside the firewall rules
Code: Select all
nano $VESTA/data/firewall/rules.conf
Code: Select all
VPNsubnet="10.1.1.0/24"
sed "s|$VPNsubnet|0.0.0.0/0|g" -i $VESTA/data/firewall/rules.conf
Code: Select all
v-update-firewall
Re: Reset IPTables
jodumont wrote: ↑Wed Sep 26, 2018 1:16 amby looking at :I'll say:Code: Select all
https://github.com/serghey-rodin/vesta/blob/master/bin/v-update-firewall
find and modify inside the firewall rules
such as an example I restrained the port 8083 to my VPN but it went down so I replace the VPNsubnet by 0.0.0.0/0 :Code: Select all
nano $VESTA/data/firewall/rules.conf
thenCode: Select all
VPNsubnet="10.1.1.0/24" sed "s|$VPNsubnet|0.0.0.0/0|g" -i $VESTA/data/firewall/rules.conf
Code: Select all
v-update-firewall
Perfect...