Vesta Control Panel - Forum

Hello Vestacp , can i need use ipv6 on vestacp more ipv4 . so , vestacp can change ipv4 to ipv6 ?

ipv6->ipv4 method works fine

you can add in /etc/nginx/conf.d/your-ip.conf

I added this rule, however I still receive information that the server is not ready for ipv6

AAAA DNS record - OK - Found
IPv6 web server - Error - web server is unreachable: Connection refused

And you added ipv6 configuration to network config in your OS?

In Ubuntu 16.04 x64:
##############################################################
nano /etc/nginx/conf.d/45.76.163.249.conf
# Replace From:
server {
listen 45.76.163.249:80 default;
server_name _;
#access_log /var/log/nginx/45.76.163.249.log main;
location / {
proxy_pass http://45.76.163.249:8080;
}
}
# Replace To:
server {
listen [2001:19f0:4400:44e1:5400:00ff:fe4e:1dea]:80 default;
server_name _;
#access_log /var/log/nginx/45.76.163.249.log main;
location / {
proxy_pass http://[2001:19f0:4400:44e1:5400:00ff:fe4e:1dea]:8080;
}
}
##############################################################
nano /etc/apache2/conf.d/45.76.163.249.conf
# Replace From:
Listen 45.76.163.249:8080
Listen 45.76.163.249:8443
# Replace To:
Listen [2001:19f0:4400:44e1:5400:00ff:fe4e:1dea]:8080
Listen [2001:19f0:4400:44e1:5400:00ff:fe4e:1dea]:8443
##############################################################
nano /home/admin/conf/web/apache2.conf
# Replace From:
<VirtualHost 45.76.163.249:8080>
# Replace To:
<VirtualHost [2001:19f0:4400:44e1:5400:00ff:fe4e:1dea]:8080>
##############################################################
nano /etc/network/interfaces
# Replace From:
auto lo
iface lo inet loopback
auto ens3
iface ens3 inet dhcp
iface ens3 inet6 auto
# Replace To:
auto lo
iface lo inet loopback
iface lo inet6 loopback
auto ens3
iface ens3 inet static
address 45.76.163.249
netmask 255.255.254.0
gateway 45.76.162.1
dns-nameservers 8.8.4.4 8.8.8.8
iface ens3 inet6 static
address 2001:19f0:4400:44e1:5400:00ff:fe4e:1dea
netmask 64
gateway 2001:19f0:4400:44e1::
dns-nameservers 2001:4860:4860::8844 2001:4860:4860::8888
##############################################################
In Vesta GUI, I added AAAA entries for ftp, pop, www, mail, @
##############################################################

But I still receive Error 500. What else do I need to adjust, please? :(

Check your error log. The configs looks fine.

skurudo wrote:ipv6->ipv4 method works fine

you can add in /etc/nginx/conf.d/your-ip.conf

Code: Select all

listen your-ipv6:80;

Hi

I have tried to add
/etc/nginx/conf.d/2400:6180:0:d0::261e:9001.conf

and in the file
server {
listen 2400:6180:0:d0::261e:9001:80;
}

but it still failed to validate at http://ipv6-test.com/validate.php
Tested on Sat, 11 Feb 2017 01:59:01 GMT
AAAA DNS record 2400:6180::d0:0:0:261e:9001
IPv6 web server web server is unreachable : Connection refused

You need to add [] around your ipv6 in your Nginx and httpd configs.

server {
listen [2400:6180:0:d0::261e:9001]:80;
}

I would like to change the template file so that we do not need to add these line every time creating a new domain

however there are so many template file, which is the correct one? we are using nginx + php-fpm

[root@minato ~]# cat /usr/local/vesta/data/templates/web/nginx/
caching.sh caching.tpl default.tpl hosting.stpl php-fpm/
caching.stpl default.stpl hosting.sh hosting.tpl proxy_ip.tpl

[root@minato ~]# cat /usr/local/vesta/data/templates/web/nginx/php-fpm/
cms_made_simple.stpl dokuwiki.stpl piwik.stpl
cms_made_simple.tpl dokuwiki.tpl piwik.tpl
codeigniter2.stpl drupal.stpl pyrocms.stpl
codeigniter2.tpl drupal.tpl pyrocms.tpl
codeigniter3.stpl joomla.stpl wordpress2.stpl
codeigniter3.tpl joomla.tpl wordpress2.tpl
datalife_engine.stpl no-php.stpl wordpress.stpl
datalife_engine.tpl no-php.tpl wordpress.tpl
default.stpl owncloud.stpl
default.tpl owncloud.tpl

The name of the template is the same as the what you choose when you add the domain.