We are happy to announce that Vesta is back under active development as of 25 February 2024. We are working on v1 candidate and expect to engage more with the community over the coming months. We are committed to open source, and we encourage contributors to help us build the future of Vesta.
Own DNS server configuration for domain.
-
- Posts: 1
- Joined: Wed Oct 11, 2017 12:30 am
Own DNS server configuration for domain.
I did login to my domain handler panel and set my domain DNS server to my new VESTACP centOS7 server, only with IPv4 address (no FQDN).
Then i did read this topic: viewtopic.php?t=3990 and do step by steps it said.
The domain address was pointed to an old server and i know sometimes needed to DNS servers resolve new IP information.
So i decided to test DNS with nslookup command. When i did use " nslookup mydomain.com 127.0.0.1 (or public IP address) on the server itself, it will resolve and show correct new IP address. But when i use nslookup domain.com x.x.x.x from another computer which is in the internet, (x.x.x.x is VESTACP server's public IPv4 address), It shows old IP address !!! as non-authoritative answer.
I got suspicious to BIND so i changed named.conf to:
listen-on port 53 { any; };
allow-query { any; };
But when i get query with nslookup outside of the server self, will show old IP address!
I did flush caches both sides.
I did disable another DNS servers on local machine.
and i did add server public IPv4 address as first nameserver in /etc/resolve.conf
But i can't find what is the problem!
Then i did read this topic: viewtopic.php?t=3990 and do step by steps it said.
The domain address was pointed to an old server and i know sometimes needed to DNS servers resolve new IP information.
So i decided to test DNS with nslookup command. When i did use " nslookup mydomain.com 127.0.0.1 (or public IP address) on the server itself, it will resolve and show correct new IP address. But when i use nslookup domain.com x.x.x.x from another computer which is in the internet, (x.x.x.x is VESTACP server's public IPv4 address), It shows old IP address !!! as non-authoritative answer.
I got suspicious to BIND so i changed named.conf to:
listen-on port 53 { any; };
allow-query { any; };
But when i get query with nslookup outside of the server self, will show old IP address!
I did flush caches both sides.
I did disable another DNS servers on local machine.
and i did add server public IPv4 address as first nameserver in /etc/resolve.conf
But i can't find what is the problem!