Reinstallation of vestacp
Posted: Thu Oct 12, 2017 7:13 am
Hello all,
I installed vestacp on vps with centos 7.0 and it was working fine. Yesterday i found that i was not able to access the webmail for the emails on my domain which i had set and were earlier working. So, i tried to reinstall vesta cp, after removing it using below commands.
--> Finished Dependency Resolution
Error: php-mysql conflicts with php-mysqlnd-5.6.31-1.el7.remi.x86_64
Error: Package: php-mysql-5.4.16-42.el7.x86_64 (C7.3.1611-base)
Requires: php-pdo(x86-64) = 5.4.16-42.el7
Installed: php-pdo-5.6.31-1.el7.remi.x86_64 (@remi-php56)
php-pdo(x86-64) = 5.6.31-1.el7.remi
Available: php-pdo-5.4.16-21.el7.x86_64 (C7.0.1406-base)
php-pdo(x86-64) = 5.4.16-21.el7
Available: php-pdo-5.4.16-23.el7_0.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0
Available: php-pdo-5.4.16-23.el7_0.1.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0.1
Available: php-pdo-5.4.16-23.el7_0.3.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0.3
Available: php-pdo-5.4.16-36.el7_1.x86_64 (C7.1.1503-updates)
php-pdo(x86-64) = 5.4.16-36.el7_1
Available: php-pdo-5.4.16-36.1.el7_2.1.x86_64 (C7.2.1511-updates)
php-pdo(x86-64) = 5.4.16-36.1.el7_2.1
Available: php-pdo-5.4.16-36.3.el7_2.x86_64 (C7.2.1511-updates)
php-pdo(x86-64) = 5.4.16-36.3.el7_2
Available: php-pdo-5.4.16-42.el7.x86_64 (C7.3.1611-base)
php-pdo(x86-64) = 5.4.16-42.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
Error: yum install failed
I installed vestacp on vps with centos 7.0 and it was working fine. Yesterday i found that i was not able to access the webmail for the emails on my domain which i had set and were earlier working. So, i tried to reinstall vesta cp, after removing it using below commands.
- service vesta stop
yum remove vesta*
rm -f /etc/yum.repos.d/vesta.repo
rm -rf /usr/local/vesta
- service vesta stop
--> Finished Dependency Resolution
Error: php-mysql conflicts with php-mysqlnd-5.6.31-1.el7.remi.x86_64
Error: Package: php-mysql-5.4.16-42.el7.x86_64 (C7.3.1611-base)
Requires: php-pdo(x86-64) = 5.4.16-42.el7
Installed: php-pdo-5.6.31-1.el7.remi.x86_64 (@remi-php56)
php-pdo(x86-64) = 5.6.31-1.el7.remi
Available: php-pdo-5.4.16-21.el7.x86_64 (C7.0.1406-base)
php-pdo(x86-64) = 5.4.16-21.el7
Available: php-pdo-5.4.16-23.el7_0.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0
Available: php-pdo-5.4.16-23.el7_0.1.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0.1
Available: php-pdo-5.4.16-23.el7_0.3.x86_64 (C7.0.1406-updates)
php-pdo(x86-64) = 5.4.16-23.el7_0.3
Available: php-pdo-5.4.16-36.el7_1.x86_64 (C7.1.1503-updates)
php-pdo(x86-64) = 5.4.16-36.el7_1
Available: php-pdo-5.4.16-36.1.el7_2.1.x86_64 (C7.2.1511-updates)
php-pdo(x86-64) = 5.4.16-36.1.el7_2.1
Available: php-pdo-5.4.16-36.3.el7_2.x86_64 (C7.2.1511-updates)
php-pdo(x86-64) = 5.4.16-36.3.el7_2
Available: php-pdo-5.4.16-42.el7.x86_64 (C7.3.1611-base)
php-pdo(x86-64) = 5.4.16-42.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
Error: yum install failed