We are happy to announce that Vesta is back under active development as of 25 February 2024. We are working on v1 candidate and expect to engage more with the community over the coming months. We are committed to open source, and we encourage contributors to help us build the future of Vesta.
PSAD and LOG
PSAD and LOG
Hello,
Does the firewall in Vesta accept LOG rules?
I plan to use PSAD which requires these rules:
Does the firewall in Vesta accept LOG rules?
I plan to use PSAD which requires these rules:
Code: Select all
-A INPUT -j LOG
-A FORWARD -j LOG
-
- Posts: 88
- Joined: Thu Mar 06, 2014 7:52 pm
- Contact:
Re: PSAD and LOG
Not via the GUI they don't, but there is another way which I'll explain tomorrow to you, otherwise vesta resets your rules when you alter something.sinklar wrote:Hello,
Does the firewall in Vesta accept LOG rules?
I plan to use PSAD which requires these rules:
Code: Select all
-A INPUT -j LOG -A FORWARD -j LOG
Stay tuned (not on a pc atm and too lazy to type on cell :P)
-
- Posts: 88
- Joined: Thu Mar 06, 2014 7:52 pm
- Contact:
Re: PSAD and LOG
Ok, finally have a moment to post this code. Put it as the first firewall rule (code below). After you've done that you can see it in VestaCP and change another rule there and then revert that rule (put old value back). Then run iptables -L and see whether LOG is still there. Then you're done ;)drMacFaulty wrote:Not via the GUI they don't, but there is another way which I'll explain tomorrow to you, otherwise vesta resets your rules when you alter something.sinklar wrote:Hello,
Does the firewall in Vesta accept LOG rules?
I plan to use PSAD which requires these rules:
Code: Select all
-A INPUT -j LOG -A FORWARD -j LOG
Stay tuned (not on a pc atm and too lazy to type on cell :P)
CODEShow
Code: Select all
# /usr/local/vesta/data/firewall/rules.conf
# Adjust the date and time.
RULE='1' ACTION='LOG' PROTOCOL='ALL' PORT='0' IP='0.0.0.0/0' COMMENT='IPS' SUSPENDED='no' TIME='21:26:18' DATE='2015-02-23'