Page 1 of 1

Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Wed Jul 12, 2017 8:42 pm
by Daimko
Hello,

I can not configure Vesta CP correctly to be able to use my email addresses with STARTTLS directly from a mobile application like Outlook.

My domain : my.domain
hostname : mail.my.domain

/etc/exim4/exim4.conf.template

Code: Select all

######################################################################
#                                                                    #
#          Exim configuration file for Vesta Control Panel           #
#                                                                    #
######################################################################

SPAMASSASSIN = yes
SPAM_SCORE = 50
CLAMD =  yes

disable_ipv6=true
add_environment=<; PATH=/bin:/usr/bin
keep_environment=

domainlist local_domains = dsearch;/etc/exim4/domains/
domainlist relay_to_domains = dsearch;/etc/exim4/domains/
hostlist relay_from_hosts = 127.0.0.1
hostlist whitelist = net-iplsearch;/etc/exim4/white-blocks.conf
hostlist spammers = net-iplsearch;/etc/exim4/spam-blocks.conf
no_local_from_check
untrusted_set_sender = *
acl_smtp_connect = acl_check_spammers
acl_smtp_mail = acl_check_mail
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
acl_smtp_mime = acl_check_mime

.ifdef SPAMASSASSIN
spamd_address = 127.0.0.1 783
.endif

.ifdef CLAMD
av_scanner = clamd: /var/run/clamav/clamd.ctl
.endif

tls_advertise_hosts = *
tls_certificate = /home/admin/conf/web/ssl.my.domain.crt
tls_privatekey = /home/admin/conf/web/ssl.my.domain.key
auth_advertise_hosts = ${if eq {$tls_cipher}{}{}{*}}

daemon_smtp_ports = 25 : 465 : 587 : 2525
tls_on_connect_ports = 465
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 5s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d

DKIM_DOMAIN = ${lc:${domain:$h_from:}}
DKIM_FILE = /etc/exim4/domains/${lc:${domain:$h_from:}}/dkim.pem
DKIM_PRIVATE_KEY = ${if exists{DKIM_FILE}{DKIM_FILE}{0}}



######################################################################
#                       ACL CONFIGURATION                            #
#         Specifies access control lists for incoming SMTP mail      #
######################################################################
begin acl

acl_check_spammers:
  accept  hosts         = +whitelist

  drop    message       = Your host in blacklist on this server.
          log_message   = Host in blacklist
          hosts         = +spammers

  accept


acl_check_mail:
  deny    condition     = ${if eq{$sender_helo_name}{}}
          message       = HELO required before MAIL

  drop    message       = Helo name contains a ip address (HELO was $sender_helo_name) and not is valid
          condition     = ${if match{$sender_helo_name}{\N((\d{1,3}[.-]\d{1,3}[.-]\d{1,3}[.-]\d{1,3})|([0-9a-f]{8})|([0-9A-F]{8}))\N}{yes}{no}}
          condition     = ${if match {${lookup dnsdb{>: defer_never,ptr=$sender_host_address}}\}{$sender_helo_name}{no}{yes}}
          delay         = 45s

  drop    condition     = ${if isip{$sender_helo_name}}
          message       = Access denied - Invalid HELO name (See RFC2821 4.1.3)

  drop    condition     = ${if eq{[$interface_address]}{$sender_helo_name}}
          message       = $interface_address is _my_ address

  accept


acl_check_rcpt:
  accept  hosts         = :

  deny    message       = Restricted characters in address
          domains       = +local_domains
          local_parts   = ^[.] : ^.*[@%!/|]

  deny    message       = Restricted characters in address
          domains       = !+local_domains
          local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./

  require verify        = sender

  accept  hosts         = +relay_from_hosts
          control       = submission

  accept  authenticated = *
          control       = submission/domain=

  deny    message       = Rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
          hosts         = !+whitelist
          dnslists      = ${readfile {/etc/exim4/dnsbl.conf}{:}}

  require message       = relay not permitted
          domains       = +local_domains : +relay_to_domains

  deny    message       = smtp auth requried
         sender_domains = +local_domains
         !authenticated = *

  require verify        = recipient

.ifdef CLAMD
  warn    set acl_m0    = no

  warn    condition     = ${if exists {/etc/exim4/domains/$domain/antivirus}{yes}{no}}
          set acl_m0    = yes
.endif

.ifdef SPAMASSASSIN
  warn    set acl_m1    = no

  warn    condition     = ${if exists {/etc/exim4/domains/$domain/antispam}{yes}{no}}
          set acl_m1    = yes
.endif

  accept


acl_check_data:
.ifdef CLAMD
  deny   message        = Message contains a virus ($malware_name) and has been rejected
         malware        = *
         condition      = ${if eq{$acl_m0}{yes}{yes}{no}}
.endif

.ifdef SPAMASSASSIN
  warn   !authenticated = *
         hosts          = !+relay_from_hosts
         condition      = ${if < {$message_size}{100K}}
         condition      = ${if eq{$acl_m1}{yes}{yes}{no}}
         spam           = nobody:true/defer_ok
         add_header     = X-Spam-Score: $spam_score_int
         add_header     = X-Spam-Bar: $spam_bar
         add_header     = X-Spam-Report: $spam_report
         set acl_m2     = $spam_score_int

  warn   condition      = ${if !eq{$acl_m2}{} {yes}{no}}
         condition      = ${if >{$acl_m2}{SPAM_SCORE} {yes}{no}}
         add_header     = X-Spam-Status: Yes
         message        = SpamAssassin detected spam (from $sender_address to $recipients).
.endif

  accept


acl_check_mime:
  deny   message        = Blacklisted file extension detected
         condition      = ${if match {${lc:$mime_filename}}{\N(\.ade|\.adp|\.bat|\.chm|\.cmd|\.com|\.cpl|\.exe|\.hta|\.ins|\.isp|\.jse|\.lib|\.lnk|\.mde|\.msc|\.msp|\.mst|\.pif|\.scr|\.sct|\.shb|\.sys|\.vb|\.vbe|\.vbs|\.vxd|\.wsc|\.wsf|\.wsh)$\N}{1}{0}}

  accept



######################################################################
#                   AUTHENTICATION CONFIGURATION                     #
######################################################################
begin authenticators

dovecot_plain:
  driver = dovecot
  public_name = PLAIN
  server_socket = /var/run/dovecot/auth-client
  server_set_id = $auth1

dovecot_login:
  driver = dovecot
  public_name = LOGIN
  server_socket = /var/run/dovecot/auth-client
  server_set_id = $auth1



######################################################################
#                      ROUTERS CONFIGURATION                         #
#               Specifies how addresses are handled                  #
######################################################################
begin routers

#smarthost:
#  driver = manualroute
#  domains = ! +local_domains
#  transport = remote_smtp
#  route_list = * smartrelay.vestacp.com
#  no_more
#  no_verify

dnslookup:
  driver = dnslookup
  domains = !+local_domains
  transport = remote_smtp
  no_more

userforward:
  driver = redirect
  check_local_user
  file = $home/.forward
  allow_filter
  no_verify
  no_expn
  check_ancestor
  file_transport = address_file
  pipe_transport = address_pipe
  reply_transport = address_reply

procmail:
  driver = accept
  check_local_user
  require_files = ${local_part}:+${home}/.procmailrc:/usr/bin/procmail
  transport = procmail
  no_verify

autoreplay:
  driver = accept
  require_files = /etc/exim4/domains/$domain/autoreply.${local_part}.msg
  condition = ${if exists{/etc/exim4/domains/$domain/autoreply.${local_part}.msg}{yes}{no}}
  retry_use_local_part
  transport = userautoreply
  unseen

aliases:
  driver = redirect
  headers_add = X-redirected: yes
  data = ${extract{1}{:}{${lookup{$local_part@$domain}lsearch{/etc/exim4/domains/$domain/aliases}}}}
  require_files = /etc/exim4/domains/$domain/aliases
  redirect_router = dnslookup
  pipe_transport = address_pipe
  unseen

localuser_fwd_only:
  driver = accept
  transport = devnull
  condition = ${if exists{/etc/exim4/domains/$domain/fwd_only}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/fwd_only}{true}{false}}}}

localuser_spam:
  driver = accept
  transport = local_spam_delivery
  condition = ${if eq {${if match{$h_X-Spam-Status:}{\N^Yes\N}{yes}{no}}} {${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}{yes}{no_such_user}}}}

localuser:
  driver = accept
  transport = local_delivery
  condition = ${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}{true}{false}}

catchall:
  driver = redirect
  headers_add = X-redirected: yes
  require_files = /etc/exim4/domains/$domain/aliases
  data = ${extract{1}{:}{${lookup{*@$domain}lsearch{/etc/exim4/domains/$domain/aliases}}}}
  file_transport = local_delivery
  redirect_router = dnslookup

terminate_alias:
  driver = accept
  transport = devnull
  condition = ${lookup{$local_part@$domain}lsearch{/etc/exim4/domains/$domain/aliases}{true}{false}}



######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
begin transports

remote_smtp:
  driver = smtp
  #helo_data = $sender_address_domain
  dkim_domain = DKIM_DOMAIN
  dkim_selector = mail
  dkim_private_key = DKIM_PRIVATE_KEY
  dkim_canon = relaxed
  dkim_strict = 0

procmail:
  driver = pipe
  command = "/usr/bin/procmail -d $local_part"
  return_path_add
  delivery_date_add
  envelope_to_add
  user = $local_part
  initgroups
  return_output

local_delivery:
  driver = appendfile
  maildir_format
  maildir_use_size_file
  user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}
  group = mail
  create_directory
  directory_mode = 770
  mode = 660
  use_lockfile = no
  delivery_date_add
  envelope_to_add
  return_path_add
  directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}/mail/$domain/$local_part"
  quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}M
  quota_warn_threshold = 75%

local_spam_delivery:
  driver = appendfile
  maildir_format
  maildir_use_size_file
  user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}
  group = mail
  create_directory
  directory_mode = 770
  mode = 660
  use_lockfile = no
  delivery_date_add
  envelope_to_add
  return_path_add
  directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}/mail/$domain/$local_part/.Spam"
  quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}M
  quota_directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim4/domains/$domain/passwd}}}}/mail/$domain/$local_part"
  quota_warn_threshold = 75%

address_pipe:
  driver = pipe
  return_output

address_file:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  return_path_add

address_reply:
  driver = autoreply

userautoreply:
  driver = autoreply
  file = /etc/exim4/domains/$domain/autoreply.${local_part}.msg
  from = "${local_part}@${domain}"
  headers = Content-Type: text/plain; charset=utf-8;\nContent-Transfer-Encoding: 8bit
  subject = "${if def:h_Subject: {Autoreply: \"${rfc2047:$h_Subject:}\"} {Autoreply Message}}"
  to = "${sender_address}"

devnull:
  driver = appendfile
  file = /dev/null



######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################
begin retry

# Address or Domain    Error       Retries
# -----------------    -----       -------
*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h



######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################
begin rewrite



######################################################################
/etc/dovecot/dovecot.conf

Code: Select all

protocols = imap imaps pop3 pop3s
listen = *, ::
base_dir = /var/run/dovecot/
!include conf.d/*.conf

ssl = yes
ssl_cert_file = /home/admin/conf/web/ssl.my.domain.crt
ssl_key_file = /home/admin/conf/web/ssl.my.domain.key

# configure pop3-proxy
# added to disable port 110 for unsecure pop3
service pop3-login {
  inet_listener pop3 {
    port                       = 0
  }
}
/etc/dovecot/conf.d/10-auth.conf

Code: Select all

disable_plaintext_auth = yes
auth_verbose = yes
auth_mechanisms = plain login
!include auth-passwdfile.conf.ext
/etc/dovecot/conf.d/10-ssl.conf

Code: Select all

ssl = yes
ssl_cert = </home/admin/conf/web/ssl.my.domain.crt
ssl_key = </home/admin/conf/web/ssl.my.domain.key
Thank you in advance for your help ! ;)

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Sun Jul 16, 2017 8:09 pm
by Daimko
You have no idea ?

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Mon Jul 17, 2017 2:16 am
by coreXL
Hello, can you post you result on this page: https://www.checktls.com/perl/live/TestReceiver.pl
Put some existing email on the server and tell us the results.

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Mon Jul 17, 2017 7:38 am
by Daimko
Thank you for your prompt response !

The result for the mail address of the main domain : https://i.goopics.net/WpDyl.png
The result for the mail address of a client's domain : https://i.goopics.net/b59kW.png

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Tue Jul 18, 2017 8:15 am
by Daimko
If somebody passes here, i need you.
Thank you in advance for your help.

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Sat Jul 22, 2017 4:11 pm
by Daimko
Finally, I followed this tutorial : https://loune.net/2016/02/lets-encrypt- ... d-dovecot/ ;)

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Fri Jul 27, 2018 11:49 pm
by servraid
Daimko wrote:
Sat Jul 22, 2017 4:11 pm
Finally, I followed this tutorial : https://loune.net/2016/02/lets-encrypt- ... d-dovecot/ ;)
tried this but i get -bash: ./certbot-auto: No such file or directory

when trying to download certificates.

thanks for any help in advance

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Sat Jul 28, 2018 1:25 am
by dpeca

Re: Configure correctly EXIM4 and dovecot with STARTTLS

Posted: Sun Aug 12, 2018 3:34 pm
by sandy