Page 8 of 10

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Wed Jul 08, 2020 8:58 am
by singamda
Mos wrote:
Mon Jul 06, 2020 11:38 am
It was fixed by updating exim config to :

https://github.com/madeITBelgium/vesta/ ... /exim.conf

then applying

viewtopic.php?t=15262#p63585

this worked for me thank you

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Wed Jul 08, 2020 5:18 pm
by compiz
For me even with that still I get a new error every time, this time:
2020-07-08 20:15:48 Exim configuration error in line 52 of /etc/exim/exim.conf:
option setting expected: { {gt{$tls_in_sni}{}} {!match{$tls_in_sni}{/}} } {${if exists {/usr/local/vesta/ssl/exim.cert.$tls_in_sni} {/usr/local/vesta/ssl/exim.cert.$tls_in_sni} {/usr/local/vesta/ssl/certificate.crt} }} {/usr/local/vesta/ssl/certificate.crt} }

I have re-done my certs but still

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Mon Jul 13, 2020 11:38 am
by dobriyalji
peters wrote:
Thu Jun 18, 2020 3:18 pm
If you want to downgrade on CentOS 7 and get back the working version exim-4.93-3.el7.x86_64.rpm do the following:

wget https://ca1.dynanode.net/exim-4.93-3.el7.x86_64.rpm
rpm -Uvh --oldpackage exim-4.93-3.el7.x86_64.rpm

However this is only a workaround. I´m not sure if there will be a fixed exim version available or how the provided config from VestaCP should be changed to fix this problem. Any ideas?


Thanks bro you made my day...

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Mon Jul 13, 2020 1:34 pm
by servtelecom
Yes, this new configuration of exim has worked for me, I have adapted some configuration that I had customized and everything works again with this new version of exim

Do you know if this new configuration is already included in new installations of vestacp?

Thank you

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Tue Jul 14, 2020 6:05 am
by dobriyalji
edica wrote:
Thu Jun 18, 2020 3:21 pm
Very good. It worked. Thanks.

Unfortunately I don't know how to make it work in version 4.94.
peters wrote:
Thu Jun 18, 2020 3:18 pm
If you want to downgrade on CentOS 7 and get back the working version exim-4.93-3.el7.x86_64.rpm do the following:

wget ftp://ftp.pbone.net/mirror/download.fed ... x86_64.rpm
rpm -Uvh --oldpackage exim-4.93-3.el7.x86_64.rpm

However this is only a workaround. I´m not sure if there will be a fixed exim version available or how the provided config from VestaCP should be changed to fix this problem. Any ideas?
----------------------
Showing below error

error: Failed dependencies:
libopendmarc.so.2()(64bit) is needed by exim-4.93-3.el7.x86_64
libspf2.so.2()(64bit) is needed by exim-4.93-3.el7.x86_64

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Tue Jul 14, 2020 6:58 am
by servtelecom
It was fixed by updating exim config to :

https://github.com/madeITBelgium/vesta/ ... /exim.conf

then applying

viewtopic.php?t=15262#p63585

this is solution for me!

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Tue Jul 14, 2020 7:04 am
by servtelecom
It was fixed by updating exim config to :

https://github.com/madeITBelgium/vesta/ ... /exim.conf

this is solution for me!

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Tue Jul 14, 2020 7:18 am
by dobriyalji
lookout wrote:
Thu Jul 02, 2020 10:43 am
tjebbeke wrote:
Sun Jun 28, 2020 3:39 pm
I updated the config file to fix the receiving mail problems:
Change: https://github.com/madeITBelgium/vesta/ ... b8516bc78b

Config file: https://github.com/madeITBelgium/vesta/ ... /exim.conf
The error I got: vestacp smtp error 451

It worked out for me. Thank you so much.
-------------

Incoming od mailes fixed but SMTP shows temporary local problem...

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Thu Jul 16, 2020 7:56 am
by SPEC1AL1ST
dobriyalji wrote:
Tue Jul 14, 2020 7:18 am
lookout wrote:
Thu Jul 02, 2020 10:43 am
tjebbeke wrote:
Sun Jun 28, 2020 3:39 pm
I updated the config file to fix the receiving mail problems:
Change: https://github.com/madeITBelgium/vesta/ ... b8516bc78b

Config file: https://github.com/madeITBelgium/vesta/ ... /exim.conf
The error I got: vestacp smtp error 451

It worked out for me. Thank you so much.
-------------

Incoming od mailes fixed but SMTP shows temporary local problem...
Work for me, thank you!

Re: Problem after upgrade to exim-4.94-1.el7 on CentOS 7

Posted: Fri Jul 17, 2020 12:01 pm
by peters
DKIM signing is not working