Vesta Control Panel - Forum

Hi,

I have two VPSes. VPS1 is web, mail, cp, db - and I'd like VPS2 to be redundant dns server. So, ns1.domain.com will be on VPS1 and ns2.domain.com will be on VPS2.

I have VestaCP installed on both. I'm find it a difficult challenge to configure the master-slave cluster of DNS between the two servers.

Would appreciate your help.

Thanks,

It isn't that hard.

http://vestacp.com/docs/#how-to-setup-dns-cluser

Server1 : Web, DNS master, ...
Server 2: DNS Slave

1. On server2 create user 'dns-cluster'
2. on server1 run command as root: v-add-remote-dns-host server2.domainname.com 8083 admin passwordofadminaccountserver2


Password and host name should be replaced with relevant data of course.

You're right, it isn't too difficult. I ran into a problem where running the command v-add-remote-dns-host would spit back a "no directory or file found" error. But I was able to search and find a solution to that (putting /source/profiles) before the command.

The only other issue that I'm see is when I check the nameservers on intodns, it gives an error that the dns server (server2) is not responding. But everything with that server looks fine (port 53 is open, dns server is running). Any ideas?

On server2 you can check if the DNS domains and records exist in user 'dns-cluster'.

Hi,

Sorry hijack this thread. Is possible to add another cluster? Mean have dns1,dns2 and dns3 using same setup?

zarizza wrote:Hi,

Sorry hijack this thread. Is possible to add another cluster? Mean have dns1,dns2 and dns3 using same setup?

I think it's possible.

Not meaning to hijack this thread, but I'm trying to set up a Cluster with 2 servers...

on server one, I run the command:

./v-add-remote-dns-host ns2 8083 admin *******

and it returns

Error: api connection to ns2 failed

I have ns2.servername pointed to the IP of the 2nd server. So what am I failing at here?

I got that problem solved. But I've checked the 2nd server, and nothing ever syncs to the 2nd server for DNS. I'm not sure what I did wrong?

My cluster stopped sync =(

I try remove and re-add ... but not work ... just work foce sync all command

hahaha

yes... can be better .... or do manual sync from all