DNS Problem - DNS_PROBE_FINISHED_NXDOMAIN

[vikhyat]

I've started a web hosting service for my friends at office which uses VestaCP Control Panel. Sometimes, when other people try to access my website, they get a DNS not found error "DNS_PROBE_FINISHED_NXDOMAIN"

My hostnames are ns1.flaunt7.com and ns2.flaunt7.com which I created in the hostname section of GoDaddy.
Both of them have this IP : 51.15.59.215 and also my control panel (VestaCP) automatically creates the records.
My server provider (Scaleway) allows only 1 IP per server so I can't attach another IP address for use in the second name server.

So how do I fix this problem which some people are facing - "DNS_PROBE_FINISHED_NXDOMAIN"
My Domain name is flaunt7.com

[SS88]

You have set-up the nameservers and the domain correctly. The error comes about when Google cannot finish a DNS call correctly.

This could be either:
1) at your nameservers end - perhaps sometimes it's offline and/or rebooting?
2) at your network's end where the DNS servers they are using to lookup a domain are failing.

[christine91]

Sometimes when you try to open the browser you get the error dns_probe_finished_nxdomain where the webpage is not available. This error occurs when DNS fails to translate. The easiest way to solve this problem on Google Chrome as well as all the other browsers is just follow the simple steps: 1. Alter the DNS IP Address 2. Flushing the DNS 3. Restarting the DNS Client 4. Resolving the 'dns_probe_finished_nxdomain' error in Android. Read the fulI solution here. I just found the solution here - http://errorcodespro.com/error-code-dns ... _nxdomain/

[mary12]

The error " Dns_probe_finished_nxdomain " is a very common issue you encounter while browsing pages on the chrome browser. There are others problems on Chrome in addition to this. Every has its own meaning, causes, and solutions. Although, solving these faults is not very difficult and can be done with few simple ways.Refer the artical Step by Step : http://www.onlyerrors.com/dns_probe_fin ... omain.html

[jackadision]

Fix DNS Problem - DNS_PROBE_FINISHED_NXDOMAIN

Method 1: Run Windows Defender.
Method 2: Setup MTU (Maximum Transmission Unit)
Method 3: Clearing Browsers Cache.
Method 4: Temporarily Disable Antivirus Program.
Method 5: Disable AppEx Networks Accelerator feature.
Method 6: By Netsh Winsock Reset Command.
Method 7: Disable Proxy.

Source: http://www.pcerror-fix.com

[hammad]

Thanks jackadision for infomation

[Johnlumsden]

Sometimes when you try to open the browser you get the error dns_probe_finished_nxdomain where the webpage is not available. This error occurs when DNS fails to translate. The easiest way to solve this problem on Google Chrome as well as all the other browsers is just follow the simple steps: 1. Alter the DNS IP Address 2. Flushing the DNS 3. Restarting the DNS Client 4. Resolving the 'dns_probe_finished_nxdomain' error in Android. Read the fulI solution here. I just found the solution here - http://errorcodespro.com/error-code-dns_probe_finished_nxdomain/

@christine91 Thanks for the solution

[nathandev]

I'm facing error DNS_PROBE_FINISHED_NXDOMAIN in my Chrome web browser. After watching this error message, the browser stops responding and crashes all the active tabs without giving any warning message.

The error DNS_PROBE_FINISHED_NXDOMAIN in the Chrome browser is quite effective so, I fixed it following these instructions.

Step 1: Right tap on Network icon and hit Open Network and Sharing Center.

Step 2: Tap “Change adapter settings” (top left side).

Step 3: Now right tap on your active Network Connection (LAN, WiFi, Ethernet, etc.) and hit Properties.

Step 4: Choose “Internet Protocol Version 4 (TCP/IPv4)” and tap Properties.

Step 5:
Tap use the following DNS server addresses: and then add below server addresses and tap OK.
Preferred DNS Server: 8.8.8.8
Alternate DNS Server: 8.8.4.4

[Mattcc]

Easy fix need to change dns to 8.8.8.8 and 8.8.4.4

step by step fix https://geeksadvice.com/how-to-fix-dns_ ... ain-error/

[misterdigital]

I had been looking for the solution to this problem for a long time and I have just fixed it with the solution proposed by Mattcc . Thank you very much!