Page 1 of 1

Vesta 502 Bad Gateway

Posted: Fri Jun 22, 2018 12:30 am
by abraham
Hey Guys i keep getting 502 Bad Gateway on the Graphics Web Interface after a couple of minutes i checked the health of the server. But i could not find anything super weird is there a place i should look for error logs on this?

Also wanted to get guidance on how to create a swap.

Code: Select all

CPU       3.2%  nice:     0.0%       LOAD    1-core       MEM     54.5%  active:    1.29G       SWAP      0.0%
user:     2.3%  irq:      0.0%       1 min:    0.00       total:  1.95G  inactive:   423M       total:       0
system:   1.0%  iowait:   0.0%       5 min:    0.00       used:   1.07G  buffers:   57.8M       used:        0
idle:    96.8%  steal:    0.0%       15 min:   0.00       free:    909M  cached:     765M       free:        0

Re: Vesta 502 Bad Gateway

Posted: Fri Jun 22, 2018 1:31 pm
by treatys
I have the same problem, I've created an issue on GitHub. May I refer you here: https://github.com/serghey-rodin/vesta/issues/1625

Re: Vesta 502 Bad Gateway

Posted: Thu Aug 02, 2018 7:24 pm
by ahouse
the same problem time after time.

Re: Vesta 502 Bad Gateway

Posted: Fri Aug 03, 2018 8:49 am
by mehargags
yes the problem has not gone away completely... I can confirm.
I faced this on a few servers too even after the latest updates and reboot

Re: Vesta 502 Bad Gateway

Posted: Thu Jun 06, 2019 6:05 am
by kanishka
Same problem here, how to fix this?