Vesta Control Panel - Forum

Здравствуйте! все рекомендации из темы "не входит в панель" сделал -место есть, sudoers.d/admin правильный, вчера даже смог войти, а сегодня какая то новая хрень в ssh в ответ на service vesta status:
Dec 01 20:26:57 kvmvps sudo[27486]: pam_unix(sudo:auth): conversation failed
Dec 01 20:26:57 kvmvps sudo[27486]: pam_unix(sudo:auth): auth could not identify password for [admin]
Dec 01 20:26:59 kvmvps sudo[27490]: pam_unix(sudo:auth): conversation failed
Dec 01 20:26:59 kvmvps sudo[27490]: pam_unix(sudo:auth): auth could not identify password for [admin]
Dec 01 20:26:59 kvmvps sudo[27491]: pam_unix(sudo:auth): conversation failed
и самое интересное в консоли хрома ошибки сыпятся бесконечно - даже без ввода логина пароля.(в скрине)
в логе nginx-error миллион одинаковых ошибок:
PHP message: PHP Notice: Undefined index: user in /usr/local/vesta/web/api/v1/login/index.php on line 157" while reading response header from upstream, client: 11.111.10.166, server: _, request: "GET /api/v1/login/index.php?token=6dc017905f19c0730dec09ac0cd27fd4 HTTP/1.1", upstream: "fastcgi://unix:/var/run/vesta-php.sock:", host: "111.111.111.111:8083", referrer: "https://111.111.111.111:8083/login/"
2021/12/01 20:32:33 [error] 27214#0: *132 FastCGI sent in stderr: "PHP message: PHP Warning: Invalid argument supplied for foreach() in /usr/local/vesta/web/api/v1/login/index.php on line 129
PHP message: PHP Notice: Undefined index: user in /usr/local/vesta/web/api/v1/login/index.php on line 157" while reading response header from upstream, client: 11.111.10.166, server: _, request: "GET /api/v1/login/index.php?token=6dc017905f19c0730dec09ac0cd27fd4 HTTP/1.1", upstream: "fastcgi://unix:/var/run/vesta-php.sock:", host: "111.111.111.111:8083", referrer: "https://111.111.111.111:8083/login/"

Подскажите пожалуйста, куда бы ещё смотреть, как это побороть?

Здравствуйте. Укажите версию ОС на сервере и версию панели
Эти рекомендации? viewtopic.php?f=10&t=14958&p=61578#p61578

centos7
Да, всё проверил из той темы, hdd40%, inod16% админ анлимитед, - system.log кончается 13.09, это я пытался зайти, в 3:24 мне удалось зайти, была ошибка в синтаксисе файла, которую я пофиксил, днём нигде ничего не менял, а пускать опять перестала.
2021-12-01 03:24:29 v-change-user-password 'admin' '******'
2021-12-01 03:24:50 v-change-user-password 'admin' '******' 'v-check-user-password' 'admin' 'ххх'
2021-12-01 13:09:00 v-change-user-password 'admin' '******'
2021-12-01 13:09:22 v-change-user-password 'admin' '******'
2021-12-01 13:09:26 v-change-user-password 'admin' '******'

"VERSION": "0.9.8"

скиньте результаты команд

# v-list-sys-vesta-updates
PKG VER REL ARCH UPDT DATE
--- --- --- ---- ---- ----
vesta 1.0.0 5 x86_64 yes 2021-12-01
vesta-php 1.0.0 1 x86_64 yes 2021-11-24
vesta-nginx 1.0.0 1 x86_64 yes 2021-11-24
vesta-ioncube 1.0.0 1 x86_64 yes 2021-11-24
vesta-softaculous 1.0.0 1 x86_64 yes 2021-11-24

--------------------------------------------------------------------
# cat /etc/sudoers.d/admin
# Created by vesta installer
Defaults env_keep="VESTA"
Defaults:admin !syslog
Defaults:admin !requiretty
Defaults:root !requiretty


-------------------------------------------------------------------
# cat /etc/sudoers
## Sudoers allows particular users to run various commands as
## the root user, without needing the root password.
##
## Examples are provided at the bottom of the file for collections
## of related commands, which can then be delegated out to particular
## users or groups.
##
## This file must be edited with the 'visudo' command.

## Host Aliases
## Groups of machines. You may prefer to use hostnames (perhaps using
## wildcards for entire domains) or IP addresses instead.
# Host_Alias FILESERVERS = fs1, fs2
# Host_Alias MAILSERVERS = smtp, smtp2

## User Aliases
## These aren't often necessary, as you can use regular groups
## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname
## rather than USERALIAS
# User_Alias ADMINS = jsmith, mikem


## Command Aliases
## These are groups of related commands...

## Networking
# Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool

## Installation and management of software
# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum

## Services
# Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig, /usr/bin/systemctl start, /usr/bin/systemctl stop, /usr/bin/systemctl reload, /usr/bin/systemctl restart, /usr/bin/systemctl status, /usr/bin/systemctl enable, /usr/bin/systemctl disable

## Updating the locate database
# Cmnd_Alias LOCATE = /usr/bin/updatedb

## Storage
# Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount

## Delegating permissions
# Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp

## Processes
# Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall

## Drivers
# Cmnd_Alias DRIVERS = /sbin/modprobe

# Defaults specification

#
# Refuse to run if unable to disable echo on the tty.
#
Defaults !visiblepw

#
# Preserving HOME has security implications since many programs
# use it when searching for configuration files. Note that HOME
# is already set when the the env_reset option is enabled, so
# this option is only effective for configurations where either
# env_reset is disabled or HOME is present in the env_keep list.
#
Defaults always_set_home
Defaults match_group_by_gid

Defaults env_reset
Defaults env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE KDEDIR LS_COLORS"
Defaults env_keep += "MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE"
Defaults env_keep += "LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES"
Defaults env_keep += "LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE"
Defaults env_keep += "LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY"

#
# Adding HOME to env_keep may enable a user to run unrestricted
# commands via sudo.
#
# Defaults env_keep += "HOME"

Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin

## Next comes the main part: which users can run what software on
## which machines (the sudoers file can be shared between multiple
## systems).
## Syntax:
##
## user MACHINE=COMMANDS
##
## The COMMANDS section may have other options added to it.
##
## Allow root to run any commands anywhere
admin ALL=(ALL:ALL) ALL

## Allows members of the 'sys' group to run networking, software,
## service management apps and more.
# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS

## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL

## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL

## Allows members of the users group to mount and unmount the
## cdrom as root
# %users ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom

## Allows members of the users group to shutdown this system
# %users localhost=/sbin/shutdown -h now

## Read drop-in files from /etc/sudoers.d (the # here does not mean a comment)
#includedir /etc/sudoers.d

Доступ к серверу сможете предоставить? посмотрим в чем проблема

imperio wrote: ↑

Wed Dec 01, 2021 7:12 pm

Доступ к серверу сможете предоставить? посмотрим в чем проблема

Вообще могу, но он рабочий.

в /etc/pam.d/sudo
попробуйте добавить выше

imperio wrote: ↑

Wed Dec 01, 2021 7:49 pm

в /etc/pam.d/sudo
попробуйте добавить

Code: Select all

auth       sufficient   pam_permit.so

выше

Code: Select all

auth       include      system-auth
account    include      system-auth
password   include      system-auth
session    optional     pam_keyinit.so revoke
session    include      system-auth

Заработало!
Я кстати это решение находил но дописывал строчку в конец файла))
Спасибо большое за помощь!