We are happy to announce that Vesta is back under active development as of 25 February 2024. We are working on v1 candidate and expect to engage more with the community over the coming months. We are committed to open source, and we encourage contributors to help us build the future of Vesta.
Requirements
Requirements
I'd be really interested in finding out what the requirements are for running VestaCP and perhaps what's supported and what isn't etc.
Unfortunately there appears to be no way of finding out. The obvious approach of searching for 'requirements' doesn't work in the forum, apparently the word requirements is too common.
Thanks
Unfortunately there appears to be no way of finding out. The obvious approach of searching for 'requirements' doesn't work in the forum, apparently the word requirements is too common.
Thanks
Re: Requirements
Minimum recommended requirements are:
CPU: 768Mhz
Ram: 512M
HDD: 20Gb
OS: RHEL/CentOS 5,6
CPU: 768Mhz
Ram: 512M
HDD: 20Gb
OS: RHEL/CentOS 5,6
Re: Requirements
thanks Skid, I managed to get Vesta running on CentOS last night.
I have three more questions if you have a minute. I would ask these via support but I suspect other people may benefit from the answers:
Short of running each of the command-line commands and capturing the output, are any of them documented anywhere?
Before I look at writing a wrapper for the current CLI, are any of the common-line commands available through an API?
There's mention of a WHMCS plugin on the Vesta twitter feed, has that plugin been discontinued?
I have three more questions if you have a minute. I would ask these via support but I suspect other people may benefit from the answers:
Short of running each of the command-line commands and capturing the output, are any of them documented anywhere?
Before I look at writing a wrapper for the current CLI, are any of the common-line commands available through an API?
There's mention of a WHMCS plugin on the Vesta twitter feed, has that plugin been discontinued?
Re: Requirements
I'm happy to know you managed it!
1. Documentation is on it's way. This forum is the best way to look for answers for now.
2. Admin API 100% ready and available via http. Use POST as request method. Here are some useful examples
3. WHMCS is in production and fully supported. To install it run following commands
1. Documentation is on it's way. This forum is the best way to look for answers for now.
2. Admin API 100% ready and available via http. Use POST as request method. Here are some useful examples
Code: Select all
# Crete new user account "demo"
https://server-ip:8083/api/?&user=admin&password=currentpwd&cmd=v-add-domain&arg1=demo&arg2=d3m0p4ssw0rd&[email protected]
# Add domain demo.vestacp.com
https://server-ip:8083/api/?&user=admin&password=currentpwd&cmd=v-add-domain&arg1=demo&arg2=demo.vestacp.com
# Delete user demo
https://server-ip:8083/api/?&user=admin&password=currentpwd&cmd=v-delete-user&arg1=demo
Code: Select all
cd /home/wex/web/billing-whcms-site.ltdr/public_html/modules/servers
mkdir vesta
wget http://c.vestacp.com/0.9.8/rhel/whmcs-module.php -O vesta.php