We are happy to announce that Vesta is back under active development as of 25 February 2024. We are working on v1 candidate and expect to engage more with the community over the coming months. We are committed to open source, and we encourage contributors to help us build the future of Vesta.
Failed to retrieve directory
Failed to retrieve directory
I have a problem with connecting to FTP
the FTP client
PS:I have 2 ipv4
show new file ,blank page
please where the error
the FTP client
Code: Select all
Status: Resolving address of como.horusone.com
Status: Connecting to 23.226.138.132:21...
Status: Connection established, waiting for welcome message...
Response: 220 (vsFTPd 3.0.2)
Command: USER Hoop_como
Response: 331 Please specify the password.
Command: PASS ********
Response: 230 Login successful.
Command: OPTS UTF8 ON
Response: 200 Always in UTF8 mode.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/"
Command: TYPE I
Response: 200 Switching to Binary mode.
Command: PASV
Response: 227 Entering Passive Mode (23,226,138,131,46,237).
Command: LIST
Error: Connection timed out
Error: Failed to retrieve directory listing
Code: Select all
/etc/vsftpd/vsftpd.conf
please where the error
-
- Posts: 36
- Joined: Thu Dec 05, 2013 10:55 am
Re: Failed to retrieve directory
Hi,
You need to enable Passive Mode in vsftpd (/etc/vsftpd.conf)
If you install CSF, you also need to enable the ports in TCP_IN
Good Luck.
You need to enable Passive Mode in vsftpd (/etc/vsftpd.conf)
If you install CSF, you also need to enable the ports in TCP_IN
Good Luck.
Re: Failed to retrieve directory
thank you for reply.VestaLover wrote:Hi,
You need to enable Passive Mode in vsftpd (/etc/vsftpd.conf)
If you install CSF, you also need to enable the ports in TCP_IN
Good Luck.
Solved
Adding the following:
Code: Select all
pasv_address=127.0.0.1
Code: Select all
pasv_addr_resolve=YES
but images not uploaded
Last edited by Horus on Sat Jan 11, 2014 9:41 am, edited 1 time in total.
-
- Posts: 36
- Joined: Thu Dec 05, 2013 10:55 am
Re: Failed to retrieve directory
No, you should put:
pasv_enable=YES
pasv_address=YOUR.IP.ADDRESS (put the IP that you are going to connect)
If you put 11.11.11.11 as passive address, you should connect to 11.11.11.11 not your second IP
pasv_enable=YES
pasv_address=YOUR.IP.ADDRESS (put the IP that you are going to connect)
If you put 11.11.11.11 as passive address, you should connect to 11.11.11.11 not your second IP
Re: Failed to retrieve directory
That is original vsftpd conf file,Did not work until configuration change like that in my previous postVestaLover wrote:No, you should put:
pasv_enable=YES
pasv_address=YOUR.IP.ADDRESS (put the IP that you are going to connect)
If you put 11.11.11.11 as passive address, you should connect to 11.11.11.11 not your second IP
images uploaded but not appear, this issue related to nginx.
How can i enable only Apache to specific site,and do that with live site.
-
- Posts: 9
- Joined: Wed Jun 02, 2021 1:29 pm
- Contact:
- Os: CentOS 6x
- Web: nginx + php-fpm
Re: Failed to retrieve directory
Hello,
I had the same problem and I have CSF enabled.
I managed to solve it by doing this:
- I added the ports "49152:65534" in TCP_IN in CSF;
- I enabled iptables (it was disabled);
I hope my information can help.
--
André Bastos
Webhosting
Hospedagem de Sites
I had the same problem and I have CSF enabled.
I managed to solve it by doing this:
- I added the ports "49152:65534" in TCP_IN in CSF;
- I enabled iptables (it was disabled);
I hope my information can help.
--
André Bastos
Webhosting
Hospedagem de Sites